Natural Birch Plywood

Natural Birch Plywood

Natural Birch plywood cases are 5/8″ birch plywood with pre-finished ultraviolet Polyurethane cured top coat. The edges are taped with PVC applied with hot melt glue. Veneer finished ends have matching veneer front edge unless otherwise requested. Cabinets with wood veneer finished interior will be taped with wood veneer tape.  Cases are not available with laminate edges, unfinished wood veneer tape, or finished wood veneer tape, except as noted on door pages.

Note: 5/8″ plywood cabinet cases have a material thickness tolerance of plus 0 and minus 3/64″ per the American National Standard for Hardwood and Decorative Plywood.

Note: Finished end material dimensions specified may vary by plus/minus 1/32″, as per industry standard

White Melamine Particleboard

White Melamine Particleboard

Our most affordable cabinet cases are built of textured white melamine overlaid 5/8” industrial grade particleboard with a glue and dowel construction. The edges are taped with PVC applied with hot melt glue. Bottom edges of wall cabinet finished ends are taped white PVC. Cases are not available with laminate edges or unfinished wood veneer tape. All cabinets have full depth adjustable shelves where indicated, and fixed shelves where indicated. Base cabinets are constructed for built-up counter tops. Toe kicks are integral and unfinished.

Cabinetry panels are all 5/8” industrial grade particleboard with dowel joinery. Beech hardwood dowels are used for each connection to assure the highest structural integrity. Our assembly process includes wood glue in each dowel hole or dado and then each cabinet is machine pressed to assure squareness and tight joints at all connections.

Cabinet backs and drawer bottoms are 1/4″ thick medium density fiberboard that is laminated on one side with melamine to provide a water resistant and highly wear resistant durable surface. Cabinet backs are secured to the cabinet by the use of dados on all four sides. The four-sided interlocking backs assure absolute squareness of each and every cabinet and drawer box.

Drawer fronts, sides, and backs are white melamine overlaid 5/8” industrial grade particleboard. The edges visible after complete installation are laminated with PVC edge banding. This very clean, all white melamine laminated drawer has proven to be especially suited for kitchen use.
 

White Plywood

White Plywood

Our premium 5/8” plywood cases feature an abrasion resistant white vinyl foil or clear birch veneer. The edges are taped with PVC applied with hot melt glue. Bottom edges of wall cabinet finished ends are taped with PVC. Cases
are not available with laminate edges or unfinished wood veneer tape. All cabinets have full depth adjustable shelves where indicated, and fixed shelves where indicated. Base cabinets are constructed for built-up counter tops.
Toe kicks are integral and unfinished.

Cabinetry panels are all 5/8” plywood with dowel joinery. Beech hardwood dowels are used for each connection to assure the highest structural integrity. Our assembly process includes wood glue in each dowel hole or dado and
then each cabinet is machine pressed to assure squareness and tight joints at all connections.

Cabinet backs and drawer bottoms are 1/8″ thick plywood to match the 5/8” material. Cabinet backs are secured to the cabinet by the use of dados on all four sides. The four-sided interlocking backs assure absolute squareness of each and every cabinet and drawer box.

Drawer fronts, sides, and backs are 5/8” plywood. The edges visible after complete installation are laminated with PVC edge banding.

 

Finished Parts

TBP’s products are inspected prior to manufacturing to ensure the highest quality. No termite/insect treatment is included. Warranty does not cover termite/insect infestation or damage to cabinetry or parts.

Due to different materials being used in the manufacture of the cabinet case, its doors, drawer fronts and accessory parts, the appearance of exposed surfaces may not be exactly the same. The parts may appear to have various minor color differences, which may be intensified due to the shading and natural and artificial lighting present in the rooms in which the cabinets are installed.

Glenview Maple Vinyl is used for parts and finished ends where specified for Fremont Maple, Slab Maple and Malheu door styles. Glenview Maple Vinyl is considered a close, but not exact match to Fremont Maple, Slab Maple and Malheur. Laminate toe kick corresponds to Wilsonart Fusion Maple#7909-60.

Warm Cherry Vinyl is used for parts and finished ends where specified for Fremont Cherry, Slab Cherry and Mauka door styles. Warm Cherry Vinyl is considered a close, but not exact match to Fremont Cherry, Slab Cherry, and Mauka. Laminate toe kick corresponds to Pionite Sunset #HP336.

Birch veneer plywood is recommended in combination with Made in Hawaii Wood Doors. It is the obligation of the TBP dealer, as a cabinetry professional, to thoroughly discuss product specifications and limitations with their client. Please refer to samples prior to ordering.